@bumble bus @brilliantblue @arryhancock OK, not a lot left, i have The large O ring (cut to length and join with superglue) Fibre washer (for under the adj locknut) O ring for filler And 2 only of the output shaft seals So if any ones interested with output seal posted 3.50 without 1.50 So to complete you need https://www.ebay.co.uk/itm/28x38x7mm-R23-NBR-Nitrile-Rubber-Rotary-Shaft-Oil-Seal-Lip-Seal/282853838257?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649 https://www.ebay.co.uk/itm/22x32x7mm-Nitrile-Rubber-Rotary-Shaft-Oil-Seal-with-Garter-Spring-R23-TC/141872150376?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649 285 ml of https://www.ebay.co.uk/itm/STRAIGHT-SAE-90-GL1-NON-EP-GEAR-OIL-VINTAGE-CLASSICS-1-LITRE/292244080021?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649 Maybe one of these https://www.ebay.co.uk/itm/Air-Cylinder-PU-Dust-Proof-Sealing-Seal-Wiper-Shaft-Blue-FJ-28x40x5x9mm/382420305298?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649 And these are the pointer seals, but google the part no AEU4019 to see if you can get cheaper https://www.johncraddockltd.co.uk/l...l-steering-boxes-rrover-and-lrover-90110.html
@Keith.H Thank you for taking the time to post these links, very useful and most appreciated. I was the last to ask, so I’ll take what ever is left. Please let me know how to pay etc Thanks again
Ok Keith, Please send me your PayPal details and I'll get it over to you, I have the pointer seal Regards john
Thanks Keith. Very good of you to take the time to post those links. Please send me your PayPal details and I will send the 3.50 Many Thanks David
All i have left is the Fibre washer for the locknut and the O ring for the filler plug, drop me your address and i will stick them in the post. So as well as what i listed above you will need 30 ish cm of 2mm O ring, cut to length and join with a dab of super glue https://www.ebay.co.uk/itm/2mmCord-...409840?hash=item4b35938e30:g:oh4AAOSwLUpaZeDc