A 100w solar panel won’t keep up with the draw of that fridge I’m afraid. Have a look at compressor fridges they ain’t cheap but draw a lot less current
The fridge you have will use about 10amp A 100w solar panel in very bright sunshine and at the right angle to the sun will produce a max 8amp
Thanx the price of a compressor fridge that really puts me off. So a 200w solar system with a 30a mppt regulator should suffice for the fridge on, during the day only?
I practically did the same as you for insulation, however I found this (though rather boring) quite interesting. This one is more interesting
Somehow missed thus whole thread, shame as I have the same model Moonraker and it also had the cool box Like you I copied the original interior in ply but used the smev 9222 sink and hob Just taken it all out to change it all around again to a double bed and L shaped seating configuration Old newish interior up for grabs if anyone is looking for one
I have added some extra gauges so I can keep an eye on temperature and pressure etc Was pretty cheap off internet and pretty easy to fit
Made it to Clumber park and back no problem I painted both new track covers other day too and fitted them I have a few parts ordered from accu spark to help with performance as I only comfortably manage 50-55 mph and struggle up any sort of hill!!!!!!!! https://www.ebay.co.uk/itm/VW-Beetl...ormance-kit-For-Bosch-Air-Cooled/183591041863
I'd use the Accuspark module but not the other parts. 55-60mph is about standard for a 1600cc bay. Camper is looking good
I have fitted accu stuff today but the rotar arm was very poor. Rest aint too back and probably because of the electronic points I have found some more horses. My timing gun came today so checked it and was a little out, I have timed/adjusted it to 900rpm and 7.5 degrees is that about right
The Accuspark rotor arm and distributor cap need to be replaced with decent quality items. Timing should be 30deg maximum mechanical advance (about 3000 revs) with the vacuum hose disconnected and the carb port blocked.
Haha it's okay ends are rubber & needs painting eventually. I can tell your very protective, shoes off before people enter
I threw the rotor arm away but rest works well and got good output from the coil. I got a new Bosch rotor and new cap and all is well