Dynamo/alternator - how can you tell them apart?? Standard fan shroud - ratty lol Empi header J-tubes and heads Well used pistons and barrels - some broken fins but still useable (pistons are at work) Engine case Deep sump - not empi as thought
I maybe interested in the heat exchangers if they are original ones with lots of fins inside and maybe the thermostat
Front engine bay tin ware - very good condition. No damage or rot. Air feed holes were blocked but easy to return unblock. I need to clean it up so it can be seen just how good this one is but for now here's a quick pic As the engine sits ATM with no internals
I shall check tomorrow eve and get some better photos for you. I did notice that they will need abit of work but a photo speaks a thousand words so they say
Thanks jimmy1975t2 It isn't quite what I'm looking for but it looks like you'll have no problems selling it.
The last of the parts, I think Chrome head covers Chrome fan shroud Bugpack "tuck-away" exhaust Used pistons and liners Another set of pistons and liners, approx 600 miles of use Crankshaft and bits Balanced Conrods Rocker arms
Flywheel Kadron/solex 40mm single carbs with fuel rail and linkage. Also filters but they ideally need replacing Camshaft, slight chipping to teeth as can been seen in photo but this was checked and won't be an issue And finally some std black "ratty" rocker covers I have a basic idea of what I would like to see in return for the parts but I am open to offers on everything. I may even rebuild it and sell it complete if it comes to it as I am in now rush to sell
I might be interested in the engine internals and block do you know if it needs work to the block and would you put on a pallet if i arranged a courier
The engine case is spot on and ready to be rebuilt. It just needs new bearing shells for the main journals, big ends and cam
I have to be honest and say I'm not sure as the engine was partially stripped an in the back of my van when I bought it. MSG me and offer
Here's a test for the thermostat, it's fairly simple but should indicate whether they work or not... Hopefully this link will work....
jimmy1975t2 you need to put a price on the bits what you want for them mate http://www.thelatebay.com/index.php?threads/rules-for-selling-in-here.119/
is the thermostat still for sale , if so ill have it , pm me please . paul.ojays@blueyonder.co.uk thanks
Ill take the thermostat now that you have put the prices up dude Could you take a pic down the ends of the heat exchangers please if there the original style ones with loads of fins inside then id be interested in them Id also like to tag my interest in the cylinder heads but i wont know untill this evening if i can afford them or not I take it there not cracked or have been helicoiled in the plug holes?