Erbaspatcher ba6 fitting from scratch (with some help from Tlb )

Discussion in 'How To' started by 1973daisey, Oct 31, 2015.

  1. Not this project Mick I'm waiting and hoping @davidoft has the vital missing parts I need and then gotta repair a few parts sort wiring so I can run it in garden ect and check the safely cut outs work and trip out !! Then gotta cut into the og heating ect if I had the bits I'd say be on by end of light tomoz he he
     
    davidoft likes this.
  2. that's April i may get it up and running test it all 1st that's ages away I wanna be warm in the snow
     
  3. 1973daisey likes this.
  4. Started stripping/cleaning the parts on the unit to check and test individually!!
    1-tested glow plug and spark plug all good
    2- removed and tested internal fan and cleaned points on the end of the motor! I'll good
    3- started to check inside and found there was a rodents nest inside !! (This would of set fire on start up !! This is y we test things off the bus )
    4-also removed and cleaned a long thing (that I need to research later as need wiring connections for it)
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  5. Cripes, well done for finding the mouse nest!
     
    1973daisey likes this.
  6. Cant remember exactly what without looking it up but that last pic is a thermo switch
     
    1973daisey likes this.
  7. Couldn't of ended well !! Glad I tested it all
     
  8. Iv found a manual so will read up later but the wiring diagram is rubbish can't make it out
     
  9. recirculation fan
    [​IMG]
    [​IMG]

    temp sensor
    [​IMG]
     
    1973daisey likes this.
  10. Brilliant thank u for that have u got the x2 switch wiring on the erbaspatcher case
     
  11. this?

    [​IMG]
     
    1973daisey likes this.
  12. This helps the chrome switch connections I need !
     
  13. the one in your hand is the recirculation motor connection, the other is the temp sensor
     
    1973daisey likes this.
  14. Just seen that on ur photo bud as soon I get this sensor fuel pump and fan I'm ready to go
     
  15. sorry, what chrome switch? do you mean the flame switch? (with the long rod that goes inside the body of the heater?)
     
    1973daisey likes this.
  16. 1973daisey likes this.
  17. Long rod ........ That's it flame switch !! Yes !!
    Anything you need photos off
     

Share This Page