Bus is in gear, what gear I don't know. Is it possible to get it into neutral without the stick as I'm having trouble locating it with the new pin. Sent from my SM-G960F using Tapatalk
Yes you can do it by twisting and pulling and pushing the gearchange rod from underneath at the front. The gears are back to front but if you twist it to one side and then push forward and back it will click once from in gear to neutral then click again into gear. Neutral is the middle of the two forward-backward clicks. Easier if you lift a rear wheel with the other one chocked with the handbrake off ...then neutral is when the wheel turns. This also gets you out of issues where the transmission is loaded up with the engine against the handbrake and it is hard to pop out of gear.