Grease gun head attachment- Lock'n'lube

Discussion in 'Tools' started by mcswiggs, Mar 13, 2016.

  1. mcswiggs

    mcswiggs Supporter


    [​IMG]

    Finally, a wonder product that does what it says! I've been struggling to grease my beam properly for a while and the vast majority ends up in a pooey pile on the Tarmac. I'd even tried one of those oil injector nipple unblocker thing that mostly created a piszy pile on the Tarmac.

    But with this jobby screwed to my trusty old gun the grease goes straight in, no messing! Highly recommended to those with a similar beam affliction.
     
    AndyC likes this.
  2. 77 Westy

    77 Westy Supporter

    I’ve never had a problem with the grease guns I use and there are some complete muppets in that vid.
     
    mcswiggs, AndyC and Zed like this.
  3. Zed

    Zed Gradually getting grumpier

    Snap, mine locks on anyway if you keep it straight.:confused:
     
  4. mcswiggs

    mcswiggs Supporter

    Yep, definitely muppets, but pretty much a fair portrayal of muggins here after an hour struggling with my old grease gun!
     
  5. matty

    matty Supporter

    Mine locks on and is a pain to get it off
     
  6. Baysearcher

    Baysearcher [secret moderator]

    Same here.
    Locks on fine, can be a sod to remove.
     
  7. Zed

    Zed Gradually getting grumpier

    Push straight on, angle it away from straight until it falls off. Yanking off will knacker it.
     
  8. matty

    matty Supporter

    are you still talking about grease guns
     
    Paul Weeding, Baysearcher and Zed like this.

Share This Page