Oil bathe air filter

I need one! Actually, all I need is the reducing tube that goes into the breather hose on the side!
Any help greatly appreciated
Ta

 

you can use a larger tube ,
with a small piece of smaller tube inside the end to act as an adaptor

 

I think it is 11mm to 4mm so quite a jump. Did you manage to do it this way?

 

i did with another pipe,
on my bus air filter i used a pipe that was a bit to small one end,
and heated the small end with a large bolt in it and left it to cool so it stayed stretched,
around 15mm 0ne end and 10mm on the other..

4mm sounds small for the breather hose...
, mines around 15mm on the filter, i wouldnt think 4mm will give enough draw on the breather

 

Yes your right. Don't know where I got 4mm from. Think the rest of the breather hoses are 7mm inside