Paras bus resto

Would guess 3mm but I just have a box of rivets and pick the one that fits

 

I’ll have a measure tmw
I take it this is the type I want for the frame?

 

I use pop rivets

 

Nice and easy then cheers for the advice

 

I like simple

 

Thanks, I like you too.

 

I’ve degreased the alloy cab window trim keyed it up with red scotchbrite masked off the rubber and given it a coat of etch primer.



I’ve also stripped down the opening quarter light and frame to refurb and fit with new seals.


I left the hinge rivet as davidoft recommended

The steel frame is fairly crusty at the bottom I’m hoping it will survive the acid bath.

 

Thanks for that @paradox , I’ve got to refurb my quarter lights at some point so appreciate the detail. Hope you’re feeling better!

 

Lots of time consuming and fiddly prep done
Then etch primer and paint.

I’ve now got satin black parts to rebuild the cab door with.



I just need to treat and paint the steel d frame and wait for new quarter light seals to arrive along with finding someone to help me refit the cab door.

 

if you need seals, I have some all new

 

I’ve already ordered them from schofields

 

no worries, pm me if you need stuff xx

 

Do you have any pirate based memory games?

 

Only donkey Kong

 

Yay the steel d frame has survived the acid bath and my quarter light seals have arrived
So when I’ve painted the d frame I can rebuild the quarter light.

I’ve also pulled the bearings from the front hubs and given them a thorough clean.

 

Backing plates,hubs,discs and the wheels have gone back on the front

 

Looking good.

 

Cheers zeb
It’s been a while since it’s sat on all four wheels.

 

Your attention to detail and ability to revive the original parts is second to none.

 

Wow thanks that’s high praise indeed

I just do the best I can with what I have