Show us the last picture you took on your phone. (VW related or not!)

Discussion in 'General Discussion' started by top banana racing, Oct 17, 2015.

  1. IMG_20221001_111224.jpg

    A Faff of cavers.
     
    Lasty, Louey, Little Nellie and 6 others like this.
  2. You should be at the front shortie....:gnome:
     
    Merlin Cat1 likes this.
  3. Cleaning up headlamp bowl
    68F54693-87A0-4083-872F-F57D81BE86E6.jpeg
     
    Soggz and Pony like this.
  4. theBusmonkey

    theBusmonkey Sponsor

    It bloody well works!
    Tyres full of mud. Wet field. Didn't have the balls to stick both rears in on my own but gave it beans several times with one wheel in the muck and you'd never know...well happy.
    IMG_20221002_120913_compress82.jpg IMG_20221002_120852_compress85.jpg
     
    Day, Soggz, Little Nellie and 11 others like this.
  5. Outstanding in a field then!:D
     
    Meltman, theBusmonkey and paradox like this.
  6. Top stuff but you wouldn’t expect anything less from the reputation they have.
    I’d love to have my gearbox for the bay rebuilt strengthened where possible and a lsd fitted.

    I know it’s big money but people spend big money on lowering and alloys at least an lsd increases practically.
     
    scrooge95, Pony and theBusmonkey like this.
  7. theBusmonkey

    theBusmonkey Sponsor

    Exactly Para.
    I've got all the bits now for Chip. Peloquin, metal cage bearings, strengthening plates etc etc. Just need to make time over winter nowo_O
     
    paradox likes this.
  8. theBusmonkey

    theBusmonkey Sponsor

    That's just the start...Mrs Monkey is raring to get on the green lanes:thumbsup:
     
    scrooge95, Merlin Cat1 and paradox like this.
  9. Is the diff also available for a three rib box?

    I know it’s something i definitely want but as I’m not close to that stage I’ve not looked into it fully.
     
    Last edited: Oct 2, 2022
  10. davidoft

    davidoft Sponsor

  11. Dub and Dubber

    Dub and Dubber Supporter

    :thumbsup: for twin sliders
    IMG_20221001_101828408.jpg
    Split-finger Jenga anyone?
    IMG_20221002_173808806.jpg
     
  12. 2022-10-02 15.33.44.JPG
     
    Merlin Cat1 and F_Pantos like this.
  13. docjohn

    docjohn Supporter

    Did the Memory Walk at Clumber Park this morning with my pal Norman, who has Alzheimer's, Princess C, George T Flattie and Linda, Norman's wife. We all got a finishers' medal :)
    IMG-20221002-WA0005.jpg IMG-20221002-WA0015.jpg
     
    scrooge95, MorkC68, nicktuft and 9 others like this.
  14. Good on ya :thumbsup:
     
  15. theBusmonkey

    theBusmonkey Sponsor

    When you are we'll delve deeper into it but if your box has side adjusting rings behind the output flanges then I'm 99.9 percent certain that the differentials are the same dimension so the 091 will fit.
    The only issue is availability. They sell out quick when Gary Peloquin does a production run. There was supposed to be a run in April this year but that hasn't happened yet. Both Weddle and Go-Westy have them on back order and you can subscribe to alerts on Brickwerks. I can also buy direct if necessary but wouldn't obvs buy the same volume that for example GW would
     
    paradox likes this.
  16.  
  17. Is there a way I can tell without pulling the box apart Neil?
     
  18. theBusmonkey

    theBusmonkey Sponsor

    If it's got black or grey plastic caps under the output flanges, it'll have diff adjusting rings.
     
    paradox likes this.
  19. Soggz

    Soggz An inquisitive supporter

    CA38E762-521F-426A-8483-C6740902F872.jpeg Garage tent finally going up. Think it needs raising a few inches to get the van in though.
     
  20. It does appear from my photos that I have black or grey ones.
    D5BC4618-8707-4D20-9F60-137EF3649B40.jpeg
     
    Geordie and theBusmonkey like this.

Share This Page