Can you buy this bit the round shoulder bit that's welded between the tube and chassis? Or is it a case of make one? Sent from my SM-G981B using Tapatalk
I know Rich but you can buy the chassis replacement so I assume someone sells this bit? Sent from my SM-G981B using Tapatalk
Schofields? https://www.alanhschofield.com/ourp...e-Rear-Left-Inner-Outer-7279-211703109BR.html Yours look in good shape (unless you pinched the pic ).
If it’s the tapered piece you’re after, I made new ones for my bus. I used a piece of card and made it into a cone then carefully cut it down to give me a tapered ring that snugly fitted round the tube, then un-curled it, traced it on to 2mm thick steel then cut it out and squeezed it round the tube and welded.
Not available, but at that price plus delivery... https://bus-ok.nl/Type2-bay-window-Torsion-Tube-Repair-Kit
Ugly, but maybe weldable. I've seen worse, esp where the chassis is so rotten, the torque tube's actually flapping around
mine have always looked a bit crusty and ive never got to do the job, but would something like this work ? measurements would need checking... https://www.ebay.co.uk/itm/13223693...rentrq:4e935bdd1880ab9e641f5297fff9b650|iid:1