hot start

Discussion in 'Mech Tech' started by wendygun, Jul 8, 2013.

  1. with all the problems poeple are having with hot stsrt probs whats the best or easiest thing to do?.
    1 fit hot start relay to help with a fault.
    2 cure fault by replacing wiring to standard or better cables
     
  2. PIE

    PIE

    I would fit a hot start relay, and have on every van I have had, and I have had a few.
     
  3. Fit the relay, but give your old cables a good cleanup.
     
  4. matty

    matty Supporter

    Start by cleaning/replacing the terminals on the starter this will solve it most times

    Clean/replace terminals on the back of the ignition lock

    Fit relay if you must but i bet you will end up changing the starter before long as its this that's on it way out
     

Share This Page