Following rebuilding my t4 with hydraulic lifters I have reinstalled them. I have not fitted the pushrods and rockers as I don't want the oil to come out of the lifters. They were stored under oil but have been sat in the bores for about two weeks. Would I be advisable for me to remove pushrods tubes again and rebuild them under oil just before I fill the engine with oil or will this be unnecessary. Any comments and advice appreciated
You should be ok... The key with hydros is to not use a heavy oil... 15/40 mineral is more than enough!!
Brilliant. One less job on the list Thanks once again Paul. Your advice and expertise has been invaluable during my build.
