SOLD 3 rib gearbox off a type 4 - SOLD

Discussion in 'Late Bay Parts Classifieds' started by Deefer66, Nov 6, 2021.

  1. VW three rib Type 2 bus latebay gearbox 091 Bellhouse.

    CE code 002 gearbox three rib (1600/1700) with a 091 bellhousing

    Came off a 1800 type 4 engine bus as I've gone up to 2ltr so went to a 6 rib box

    Just refreshed with a clean up and paint and changed input and drive seals and new drive flange seals so should be good to go once refilled with oil.

    Was working fine when I took it out but I'm not gearbox builder so sold as seen but I've done what I did to my new one before it went in with seals etc to save you.

    Any questions feel free to ask..

    Code makes it a Feb 1973 box if thats important to you

    I have a decent throw out bearing I can pop on hasn't seen much use and is smooth and the cable clamp and connecting arm assembly were still in the diesel wash when i took photos.. forgot to put them back on!.. so I'll put that back on too

    £325 colect from Northwich or deliverd if not too far for fuel cost (T2 fuel economy rates )[​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Sent from my SM-T580 using Tapatalk
     
  2. @stewart kombi can't remember where you are at with your gearbox
     
    stewart kombi and MorkC68 like this.
  3. matty

    matty Supporter

    a bit far for me would you pallet it up if I organised a courier
     
    theBusmonkey likes this.
  4. Sure I can pick up something to strap it to if you want.

    Sent from my SM-G960F using Tapatalk
     
    matty likes this.
  5. matty

    matty Supporter

    That would be great if you could.
    Let me know when it’s ready and weight and size etc and I will sort collection with you.
     
  6. Cool ill find a pallet from site next week and let you know

    Sent from my SM-T580 using Tapatalk
     
    matty and theBusmonkey like this.
  7. theBusmonkey

    theBusmonkey Sponsor

    If it helps, I just strap mine with rope around the bell housing and gear carrier casting
    Tie loops in the end of the ropes then tension the rope with cable ties.:thumbsup:
    IMG_20210628_093305_compress1.jpg IMG_20210628_093317_compress40.jpg IMG_20210628_125222_compress50.jpg
     
    Deefer66 and matty like this.
  8. They go in a "tote" crate too, well Beetle box's do, I guess a Bay box is longer.
     
    matty likes this.
  9. Got this one i'll weigh them all up and strap together later.

    [​IMG]

    Sent from my SM-G960F using Tapatalk
     
    matty likes this.
  10. Its 20kg pallet and 38kg gearbox so 60kg total should cover it DM me for details if courier costs for that are OK for you

    Sent from my SM-G960F using Tapatalk
     
    matty likes this.
  11. matty

    matty Supporter

    thanks one more thing can you give me the rough sizes
     
  12. 1160mm by 800mm by 550 High .. could take a saw to the pallet and reduce the 1160 to 660mm if I put it like this..[​IMG]

    But that puts it closer to edges.

    Sent from my SM-G960F using Tapatalk
     
  13. matty

    matty Supporter

    @Deefer66 I can’t seam to attach pictures to DM
    Can you put these details on
     
    Last edited: Nov 9, 2021
  14. Will do

    Sent from my SM-G960F using Tapatalk
     

Share This Page