wash/wipe arm - Indicator stalk screws spacers, etc.. HELP!!!!

Discussion in 'Mech Tech' started by bertie78, Jan 9, 2012.

  1. Hi all,
    I'm in need of help from those in the know....I have attached a schematic picture showing the parts that are missing on my bus( 77 westy ) i've circled them in red.

    its the screws and spacers that go through the indicator and wash/wipe arms and then screw into the steering housing. They were missing on my bus, so I dont have a clue what to get, or from where?
    I've got a new indicator stalk and new wash/wipe stalk but not the bits to hold it all together....nightmare......also there is some kind of electric jointing block at the bottom of the steering housing, i think i'm missing this also.

    Any help would be greatly appreciated.
    cheers
    Lee

    07903997083
    :thinking:
     
  2. has anyone taken one apart lately? just to let me know if i am truly missing that electriacl connector block bit.
    cheers
     
  3. I would suggest someone like megabug for the spacers

    as for item 26... I don't recall seeing that before!! :eek:
     
  4. Thanks again Paul,
    yes , i'm hoping that I don't need part 26!!
    i'll give megabuga try.
    cheers
     
  5. You will need bit 26, as it acts as a guide for the switch connectors. As above, try megabug for the bits. Might be worth getting a whole used column.
     
  6. Cheers guys,
    sent an email and pics to megabug late last night - had a phonecall this afternoon, spoke to Billy at Mega bug and I think he's sorted me out with the bits...top bloke......just hope they are the right bits when they arrive ;D

    so I still need to find a thermostat union nut to screw on to the bottom and hold the cable...any ideas.... :thinking:
     

Share This Page