will these fit ?

hi will these fit my 74 bay
i ve seen the guide somewhere but a lot of it went over my head



from the back of the hub/spacer thing its 155 to the inside of the wheel
this is the box there in not sure if it s the right one but

cheers steve

 

The PCD is right as for the offset and width Im not sure they seem pretty wide. Iv seen them on T25's with out a problem

 

I've got merc AMG pentas on mine ;D fit like a glove

 

i thought they fit on the studs its the width bit i am bothered about they been on the roof in my factory for about 8 yrs
they came off the contract mangers c class merc should be able to get em for next to nothing just wanting to know if there worth putting rubber on em

 

pentas arent as wide i think maybe they're 7s, 9 are pretty big but the 35 offset is close to bay ones i think, centres should be fine though the stud holes may be 12mm and need taking out to 14

 

i think perhaps the info on the boxes would be for the new wheels, not those ones

 

I think johnny sensi has them on his bus

 

i have 8 inch wide rims on the back of my bay and it's a tight squeeze

 

if they do not fit,pm if you want to sell em as i have a mate who may be interested in these for his gypsy

 

jeez,how many as he got?

 

To many think that pile was for his old sl Amg
He s had two Ferrari s and has settled on a Bentley since he had that one
but he doesn't get rid of stuff but if I ask at the right time I should be able to get em

 

i've got a set of 7 1/2 x 16 et42 merc wheels with 215/55/16 tyres for bay and they are close to the spring plate and not a massive gap between the arch and outer edge of the tyre. as someone said above trial fit one to the van front and rear and allow a little extra clearance for tyre sidewall

 

i think i might leave em as i dont fancy running em if there going to be "a tight fit"

 

by not to tight are they practical