Full width Rock and roll bed

First off im new to this site so just hope this is in right section. Anyway im sure a few of you on here know who i aam and what i do.I can supply Full width or 3/4 steel framed rock and roll beds to fit bay,split,t25 and t4/5`s

so a full width for your bay/split steel framed with all fittings needed to assemble and with boards fitted start from £160

a 3/4 steel framed with boards start from £130

i can deliver to dub freeze you can collect from Hereford or i can post out for 20-25 extra

 

hy mate i am after just the full width r and r, without the plywood, posted to fy41hq, how much is that please, dont think my van will be ready for dubfreeze ,,thanks

 

secound dibs on this full width

 

That's a cracking piece of kit Rusty Lee!! Great price too!

 

you have a pm

 

how does it attach to the body?

can you do a couple of pics as it is being installed

 

Hi all - I can confirm the quality of Rusty's work, have just put one in my 79 ( see pics on my "Show us your Ride" thread - Jaffa Cake)

Took just minutes to fit !!

Top bloke !!
Cheers
B

 

thanks Bri nice to here you got it in already.plenty to go aound guys.posting will be 20 gerald the beds all come with boards fitted its easier to pack them with boards on.so it will be 180 to your door.


Lee.............

 

Hi mate i have a 79 panel van and want to put a rock and roll bed in with seat belts. Yours look great would it work with seat belts? Sorry this is my first van and am trying to get to grips with what works etc. Also if you have any advice on the seat belts would appreciate it. I think ivwill have to get them welded. Cheers mate

 

the bed mounts to the seat belt mounts in the van dude so you would need to bolt your sealbelys to that too,.

 

I have one of these that I got second hand it's really. Good. The seatbelts still mount using the same holes but you might need longer bolts.
I was wondering if you had a recommended size for the foam as mine seems to.be slightly small, also do you recommend upholstering onto the boards or using loose cushions?

 

ok cheers mate

 

lost out again to a bunch of newbies.......i do hate newbies so ,no really ,i dooooo >

 

loooooooooooooooooooool..joker ya da man today .....i cut full width to make it 3/4 and now i dislike the way i sleep init ,coz im hunched up due to my new interior....

 

full width is the way to go. Can't be doing with all that 3/4 "made for midgets" nonsense

 

cheers guys.

if your van doesnt have seat belt mounts thats not a problem you can buy the mounts and have them welded in or you can just bolt through the arch anduse a large washer/spreader plate on the otherside of the bolt.hope this helps


Lee....

 

Mines a microbus so i have seatbelt holes, I want a full width please buddy!